50L 150bar CO2 Bottle Argon Nitrogen Helium Air Cylinder
50L 150bar CO2 bottle Argon Nitrogen Helium Air cylinder
When opening the gas cylinder valve, the operator should pay special attention to slow, if too hasty, may cause the gas cylinder exhaust and fall to the ground (lying down when jumping) and combustible, combustion gas cylinder and even explosion accident;
50 litre nitrogen cylinder; 37 mn manganese steel; Gas cylinder production standard GB/T5099.3 or ISO9809-1; TUV; The outer diameter of the cylinder is 232mm; The hydrostatic test pressure of the gas cylinder is 250bar; Nitrogen gas tank working pressure is 150bar;
Before handling gas cylinders, operators must know the name and nature of the gas in the cylinders and precautions for safe handling, and prepare corresponding tools and protective equipment.
50 litre oxygen cylinder body height 1450mm; PZ27.8, 50 l gas cylinder mouth thread; 25E; 3/4-14 NGT, etc.; The 50 litre cylinder has a maximum storage capacity of 7.5m3 (7,500 litres); The weight of the 50-liter gas cylinder is 57.5kg; The minimum design wall thickness of 50 litre cylinders is 6.0mm;
Alias: gas cylinders, 50L gas bottles, gas bottles, 50L Nitrogen cylinders, 50L Argon;50 litre gas bottles; 50 litre gas cylinder; 50 litre gas tanks
50L 150bar CO2 Bottle Argon Nitrogen Helium N2O Air Cylinder
Generally -40-60℃. Therefore, for the gas cylinders used in cold areas, it is best to choose the material of chromium-molybdenum steel, and the tempered carbon manganese steel is also ok, but the effect is not as good as chromium-molybdenum steel.
1、Minimum order quantity: 100 only
2、Products can be exported to countries or regions:China, Southeast Asia, Middle East, Asia, Africa, Europe, Oceania, America
3、Use cylinders:Our seamless steel cylinders are widely used in industry, medical devices, fire fighting and scientific research
4、 Tensile test of gas cylinders:
A tensile test shall be carried out on material taken from the cylindrical part of the cylinder by adopting either of the following procedures. a) Rectangular specimens shall be prepared in accordance with Figure 7 and with a gauge length Lo = 5,65 So .
The two faces of the test piece representing the inside and the outside surfaces of the cylinder shall not be machined. The elongation, A, shall be not less than the values given in Equation : ma 25 000 2 A R = × (5) with an absolute minimum of 20 %.
5、Machined round specimens shall be prepared having the maximum diameter practicable, the elongation, A, measured on a gauge length of five times the specimens diameter being not less than the value calculated by the formula increased by 2 %, with an absolute minimum of 22 %.
6、50 litre Gas Cylinder Product Parameters table (ISO9809-3 TUV 150BAR)
50L 150bar CO2 Bottle Argon Nitrogen Helium N2O Air Cylinder
Type | Outside Diameter (mm) | Water Capacity (L) | Bottle Height (mm) | Weight (kg) | Working pressure (Bar) | Design wall thickness (mm) | Material Grades |
ISO232-50.0L-150 | 232 | 50.0 | 1450 | 57.5 | 150 | 6.0 | 37MN |