TUV TPDE ISO RHO CO2 Bottle Argon Nitrogen Helium Air Oxygen Cylinder
TUV CO2 bottle Argon Nitrogen Helium Air Oxygen cylinder
Tips for safe use of gas cylinders:
Safety reminder: Do not use gas bottle cap as lifting point or handle. Do not place the gas cylinder near the heat source.
The storage temperature of the gas cylinder should meet the following requirements: Acetylene cylinder should not be higher than 40 ° C, argon cylinder should not be higher than 50 ° C, and oxygen cylinder should not be higher than 60 ° C.
It is strictly forbidden to mix oxygen and acetylene cylinders. During gas welding (cutting), the safe distance between oxygen cylinders and acetylene cylinders should be at least 5 meters, and the safe distance between cylinders and ignition points should not be less than 10 meters.
Shandong Hongsheng Pressure Vessel Co., Ltd. is willing to be your long-term partner and chief cylinder safety officer, and jointly escort your cylinder safety.
TUV CO2 Bottle Argon Nitrogen Helium N2O Air Oxygen Cylinder
Product Information:
1、ISO9809-3; 89mm-267mm cylinder outer diameter; 0.8 litres to 80 litres; TUV ; Working pressure is 150bar; Hydrostatic test pressure is 250bar; 37 mn material;
2、TUV cylinder body weight: 1.60kg-72.4kg; The height of the cylinder body is 197mm-1520mm; The minimum design wall thickness of gas cylinders is 2.4mm-6.2mm; Maximum gas storage is 0.12m3-12m3 (150L-12000L); Cylinder mouth thread: PZ19.2,PZ27.8,PZ39; 25E; 3/4-14 NGT, etc.;
3、Alias: Air cylinders, Oxygen cylinders, TUV cylinders, TUV bottles, Carbon dioxide cylinder
Heat treatment: (1) Group batch: ≤200, plus gas cylinders for destructive test (generally 2); (2) Quenching can be allowed in non-mineral oil medium, but no cracks should be guaranteed. If the cooling rate in the medium is greater than 80% of the cooling rate in 20℃ water without additives, the cylinder should be tested nondestructive to verify that it is crack-free.
Wall thickness measurement of gas cylinders:
If the measurement of the wall thickness is not carried out in another stage of production, the cylindrical part shall be 100 % examined to ensure that the thickness is not less than the guaranteed minimum value, a′.
1、Minimum order quantity: 100 only
2、Industrial gas business model: there are two kinds of gas supply: customer built device gas supply and outsourcing gas supply, and outsourcing gas supply is divided into retail market and on-site gas market. Outsourcing gas supply: the third-party gas supply mode conforms to the future development trend of the industry, overseas outsourcing accounts for 80%, domestic 40%. The retail market conforms to the trend of supporting industrial structure change in the future and can meet the personalized needs of more emerging fields.
Use cylinders:Our seamless steel cylinders are widely used in industry, medical devices, fire fighting and scientific research
3、(we are the manufacturer)Products can be exported to countries or regions:China, Southeast Asia, Middle East, Asia, Africa, Europe, Oceania, America
4、The equipment shall be calibrated with the reference standard or probe, or both, moving in the same manner, in the same direction and at the same speed as will be used during the inspection of the cylinder. All visual, audible, recording or sorting devices shall operate satisfactorily at the test speed.
5、Calibration of equipment of cylinders:
Using the reference standard described , the equipment shall be adjusted to produce clearly identifiable indications from inner and outer surface notches.
The amplitude of the indications shall be as near equal as possible. If it is not possible to set the rejection levels individually, then the indication of smallest amplitude shall be used as the rejection level and for setting visual, audible, recording or sorting devices.
6、TUV CO2 Bottle Argon Nitrogen Helium N2O Air Oxygen Cylinder (ISO9809-3 TUV 150BAR)
Type | Outside Diameter (mm) | Water Capacity (L) | Bottle Height (mm) | Weight (kg) | Working pressure (Bar) | Design wall thickness (mm) | Material Grades |
WMⅡ89-1L-150 | 89 | 1 | 240 | 1.83 | 150 | 2.4 | 37MN |
WMⅡ89-1.4L-150 | 89 | 1.4 | 310 | 2.30 | 150 | 2.4 | 37MN |
WMⅡ108-2.0L-150 | 108 | 2 | 310 | 3.62 | 150 | 2.9 | 37MN |
WMⅡ108-2.5L-150 | 108 | 2.5 | 374 | 4.29 | 150 | 2.9 | 37MN |
WMⅡ108-3.0L-150 | 108 | 3.0 | 440 | 4.96 | 150 | 2.9 | 37MN |
WMⅡ108-5.0L-150 | 108 | 5.0 | 696 | 7.74 | 150 | 2.9 | 37MN |
WMⅡ140-3.4L-150 | 140 | 3.4 | 324 | 5.3 | 150 | 3.8 | 37MN |
WMⅡ140-4.0L-150 | 140 | 4.0 | 375 | 5.89 | 150 | 3.8 | 37MN |
WMⅡ140-5.0L-150 | 140 | 5.0 | 447 | 6.96 | 150 | 3.8 | 37MN |
WMⅡ140-6.3L-150 | 140 | 6.3 | 540 | 7.88 | 150 | 3.8 | 37MN |
WMⅡ140-6.7-150 | 140 | 6.7 | 569 | 8.30 | 150 | 3.8 | 37MN |
WMⅡ140-8.0L-150 | 140 | 8.0 | 665 | 9.68 | 150 | 3.8 | 37MN |
WMⅡ140-9.0L-150 | 140 | 9.0 | 744 | 10.7 | 150 | 3.8 | 37MN |
WMⅡ140-10.0L-150 | 140 | 10.0 | 818 | 11.9 | 150 | 3.8 | 37MN |
WMⅡ159-8.0L-150 | 159 | 8.0 | 548 | 9.11 | 150 | 4.3 | 37MN |
WMⅡ159-10.0L-150 | 159 | 10.0 | 660 | 10.9 | 150 | 4.3 | 37MN |
WMⅡ159-12.0L-150 | 159 | 12.0 | 780 | 13.1 | 150 | 4.3 | 37MN |
WMⅡ159-13.4L-150 | 159 | 13.4 | 861 | 15.4 | 150 | 4.3 | 37MN |
WMⅡ159-15.0L-150 | 159 | 15.0 | 932 | 16.8 | 150 | 4.3 | 37MN |
WMⅡ180-20.0L-150 | 180 | 20.0 | 1012 | 24.8 | 150 | 4.9 | 37MN |
ISO219-40.0L-150 | 219 | 40.0 | 1300 | 48.0 | 150 | 5.7 | 37MN |
ISO232-40.0L-150 | 232 | 40.0 | 1167 | 43.0 | 150 | 6.0 | 37MN |
ISO232-46.7L-150 | 232 | 46.7 | 1345 | 48.9 | 150 | 6.0 | 37MN |
ISO232-47.0L-150 | 232 | 47 | 1351 | 49.0 | 150 | 6.0 | 37MN |
ISO232-50.0L-150 | 232 | 50.0 | 1450 | 57.7 | 150 | 6.0 | 37MN |