40L 150bar CO2 Bottle Argon Nitrogen Helium N2O Air Cylinder
40L 150bar CO2 bottle Argon Nitrogen Helium N2O Air cylinder
Alias:gas cylinders, 40L gas bottles, gas bottles, CO2 gas cylinders, 40L Argon gas cylinders;40 litre gas bottles; 40 litre gas cylinder; 40 litre gas tanks
In order to avoid cylinder explosion, gas combustion, poisoning and other accidents in use. All users of bottled gas shall, according to the nature of different gases and the relevant national standards and standards, formulate the management system for the use of bottled gas and the safe operation procedures;
40 litre argon gas bottle; 37 mn manganese steel; Gas cylinder production standard GB/T5099.3 or ISO9809-3; TUV; The outer diameter of oxygen tank is 219mm; Gas tank working pressure is 150bar; The hydrostatic test pressure of the gas tank is 250bar;
The use unit should be dedicated to the bottle. It is strictly forbidden for users to refit or change the color marks of gas cylinders or mix gas without authorization. If an accident is caused, the refit shall be held responsible;
The height of the 40-litre gas cylinder is 1300mm; 40 litre gas cylinder weight 46.4kg; The 40-litre cylinder has a maximum storage capacity of 6m3 (6000 litres); The minimum design wall thickness for 219-40 litre cylinders is 5.7mm; Cylinder mouth thread PZ27.8; 25E; 3/4-14 NGT, etc.;
40L 150bar CO2 Bottle Argon Nitrogen Helium N2O Air Cylinder
The length of the wedges shall be not less than the width of the flattened cylinder. The longitudinal axis of the cylinder shall be at an angle of approximately 90° to the knife edges.
1、Minimum order quantity: 100 only
2、we are the manufacturer:Use cylinders:Our seamless steel cylinders are widely used in industry, medical devices, fire fighting and scientific research
3、Products can be exported to countries or regions:China, Southeast Asia, Middle East, Asia, Africa, Europe, Oceania, America
4、Flattening test of gas tanks:
The flattening test shall be performed on one cylinder selected from each batch after heat treatment.
The test cylinder shall be flattened between wedge-shaped knife edges with a 60° included angle, the edges being rounded to a nominal radius of 13 mm.
5、The test cylinder shall be flattened until the distance between the knife edges is in accordance .
The flattened cylinder shall remain visually uncracked.
6、Flattening test of gas cylinders:
The flattening test shall be performed on one cylinder selected from each batch after heat treatment.
The test cylinder shall be flattened between wedge-shaped knife edges with a 60° included angle, the edges being rounded to a nominal radius of 13 mm. The length of the wedges shall be not less than the width of the flattened cylinder. The longitudinal axis of the cylinder shall be at an angle of approximately 90° to the knife edges.
The test cylinder shall be flattened until the distance between the knife edges is in accordance
The flattened cylinder shall remain visually uncracked.
7、40 litre Gas Cylinder Product Parameters table (ISO9809-3 TUV 150BAR)
40L 150bar CO2 Bottle Argon Nitrogen Helium N2O Air Cylinder
Type | Outside Diameter (mm) | Water Capacity (L) | Bottle Height (mm) | Weight (kg) | Working pressure (Bar) | Design wall thickness (mm) | Material Grades |
ISO219-40.0L-150 | 219 | 40.0 | 1300 | 46.4 | 150 | 5.7 | 37MN |
ISO232-40.0L-150 | 232 | 40.0 | 1156 | 45.7 | 150 | 6.0 | 37MN |