13.4 Ltr ISO9809 2M3 150bar 37MN Oxygen Tanks Gas Cylinders
ISO9809 2M3 150bar 37MN 13.4 ltr Oxygen tanks gas cylinders
The company adheres to the business philosophy of relying on user value, and insists on responding to market changes with steady and rapid development.
Pressure cycling test
This test shall be carried out on cylinders bearing representative markings with a non-corrosive liquid subjecting the cylinders to successive reversals at an upper cyclic pressure which is equal to the hydraulic test pressure, ph.
The cylinders shall withstand 12 000 cycles without failure.
The company relies on advanced test equipment such as high precision test equipment,
high precision direct reading spectrometer, metallographic microscope, electrohydraulic servo universal testing machine, wire-cutting sawing machine, etc., with accurate test data, and strives to create an advanced seamless cylinder test center.
13.4 Ltr ISO9809 2M3 150bar 37MN Oxygen Tanks Gas Cylinders
Product Information:
1、13.4-litre medical oxygen cylinder steel cylinder; TUV; 37 mn manganese steel; Oxygen cylinder production standard GB/T5099.3 or ISO9809-3; Cylinder outer diameter is 140mm or 159mm; Oxygen cylinder hydrostatic test pressure is 250bar; Working pressure is 150bar;
2、Oxygen cylinder body height 1069mm or 861mm; Oxygen cylinder body weight 15.5kg or 15.4 kg; Oxygen cylinder mouth thread PZ27.8,25E; 3/4-14 NGT, etc.; Maximum oxygen tank storage capacity is 2m3 (2000 litres); The minimum design wall thickness of oxygen cylinder is 4.3mm;
3、Alias: 13.4 LTR Gas cylinders; 2 m3 Oxygen tanks. LTR Oxygen cylinders; 13.4 LTR Oxygen Tanks; 150bar 37mn gas tanks
4、Heat treatment:Whenever cylinders are reheat treated, the minimum guaranteed wall thickness shall be maintained.
Only the relevant prototype or batch tests needed to prove the acceptability of the batch shall be
performed again. If one or more of these retests prove even partially unsatisfactory, all cylinders of
the batch shall be rejected.
Shandong Hongsheng Pressure Vessel Co., Ltd. is willing to be your long-term partner and chief cylinder safety officer, and jointly escort your cylinder safety.
1、Minimum order quantity: 100 only
2、Use cylinders:Our seamless steel cylinders are widely used in industry, medical devices, fire fighting and scientific research
3、We are China's gas cylinder production factory, product sales:China, Southeast Asia, Middle East, Asia, Africa, Europe, Oceania, America
4、Cylinder water pressure testing process:With water as the pressurizing medium, gradually increase the pressure in the test bottle to reach the hydrostatic test pressure of the gas cylinder. Test and verify the safe carrying capacity of gas cylinders. Including measuring its volume deformation rate in the hydrostatic test to determine its safety and reliability, the pressure holding time is 30s.
5、Normalizing heat treatment in which a cylinder is heated to a uniform temperature above the upper critical point, Ac3, of the steel and then cooled in still air
6、For cylinders with hydraulic test pressure ph > 450 bar, the upper cyclic pressure may be reduced to two thirds of this test pressure. In this case, the cylinders shall withstand 80 000 cycles without failure. The value of the lower cyclic pressure shall not exceed 10 % of the upper cyclic pressure, but shall have an absolute maximum of 30 bar.
7、13.4 litre Gas Cylinder Product Parameters table (ISO9809-3)
Type | Outside Diameter (mm) | Water Capacity (L) | Bottle Height (mm) | Weight (kg) | Working pressure (Bar) | Design wall thickness (mm) | Material Grades |
WMAⅡ140-13.4L-150 | 140 | 13.4 | 1069 | 15.5 | 150 | 3.8 | 37MN |
WMAⅡ159-13.4L-150 | 159 | 13.4 | 861 | 15.4 | 150 | 3.9 | 37MN |
WMAⅡ180-13.4L-150 | 180 | 13.4 | 721 | 18.6 | 150 | 4.4 | 37MN |