2L TPED ISO RHO Industrial gas cylinder CO2 Argon Tanks Nitrogen Helium Air O2 Cylinder
TPED CO2 Argon tanks Nitrogen Helium Air O2 cylinder
Gas cylinders should be stored in a cool, dry place, away from heat sources (such as sunlight, heating, fire). Combustible gas cylinders must be stored separately from oxygen cylinders.
34CRMo4 alloy steel; TPED 89mm-232mm cylinder outer diameter; 0.8 liters to 50 liters; ISO9809-1 standard; The working pressure of industrial gas cylinders is 200bar; Hydrostatic test pressure is 300bar;
Never allow oil or other inflammable organic matter to be attached to cylinders (especially valve nozzles and pressure relief valves). Cotton, hemp and other materials shall not be used to plug leaks, to prevent combustion accidents.
Oxygen cylinder body weight is 1.60kg-72.4kg; The minimum design wall thickness of industrial oxygen cylinder is 2.4mm-6.2mm; The maximum gas storage capacity of industrial gas tank is 0.12m3-12m3 (150L-12000L); Cylinder mouth threads include PZ19.2,PZ27.8,PZ39; 25E; 3/4-14 NGT, etc.; The height of the industrial cylinder body is 197mm-1520mm;
When using gas from a cylinder, use a pressure reducing valve (barometer). All kinds of gas barometer should not be mixed, in case of explosion.
Alias: TPED Air cylinders;TPED Oxygen Cylinders,TPED Cylinders,TPD Tanks,TPD Carbon dioxide cylinders
Rho CO2 Argon Tanks Nitrogen Helium N2O Air O2 Cylinder
Several types of defects that may occur during the manufacture of seamless cylinders.
The defect may be mechanical or material. That is, basic materials used, processing technology, heat treatment control, bottle finishing, or stamping and other processing factors.
The purpose of this appendix is to identify the most common manufacturing defects and to provide rejection guidelines to inspectors performing visual inspections.
However, inspectors must have extensive experience and good judgment to detect, assess and judge a defect during visual inspection.
1、Minimum order quantity: 100 only
2、Use cylinders:Our seamless steel cylinders are widely used in industry, medical devices, fire fighting and scientific research
3、We are China's gas cylinder production factory,
product sales:China, Southeast Asia, Middle East, Asia, Africa, Europe, Oceania, America
4、Common nonconformance points in gas cylinder production
a/Internal cracks in base:Splits in the metal of the bottom of the cylinder in star form
⎯ When not removable within thickness tolerance
⎯ When removable within thickness tolerance
b/"Orange peel" surface:Orange peel appearance due to discontinuous metal flow
⎯ If sharp cracks are visible in the orange peel surface
5、Visual inspection of cylinders both inside and outside must be complete.
Metal surfaces, especially inside cylinders, should be completely clean and dry and free of oxides, corrosion and rust, which could cause serious defects. Where necessary, clean surfaces in an appropriate manner prior to further testing.
Suitable lighting sources of sufficient intensity should be used.
After cylinder threading is complete, check the inside of the bottleneck for defects using an inner hole viewer, dental profile, or other appropriate tool
6、Product parameters table(ISO9809-1 TPED 200BAR)
TPED CO2 Argon Tanks Nitrogen Helium N2O Air O2 Cylinder
Type | Outside Diameter (mm) | Water Capacity (L) | Bottle Height (mm) | Weight (kg) | Working pressure (Bar) | Design wall thickness (mm) | Material Grades |
WGⅡ89-1L-200 | 89 | 1 | 240 | 1.83 | 200 | 2.0 | 34CrMo4 |
WGⅡ89-1.4L-200 | 89 | 1.4 | 310 | 2.30 | 200 | 2.0 | |
WGⅡ108-2.0L-200 | 108 | 2 | 310 | 3.62 | 200 | 2.4 | |
WGⅡ108-2.5L-200 | 108 | 2.5 | 374 | 4.29 | 200 | 2.4 | |
WGⅡ108-3.0L-200 | 108 | 3.0 | 440 | 4.96 | 200 | 2.4 | |
WGⅡ108-5.0L-200 | 108 | 5.0 | 696 | 7.74 | 200 | 2.4 | |
WGⅡ140-3.4L-200 | 140 | 3.4 | 324 | 5.3 | 200 | 3.1 | |
WGⅡ140-4.0L-200 | 140 | 4.0 | 375 | 5.89 | 200 | 3.1 | |
WGⅡ140-5.0L-200 | 140 | 5.0 | 447 | 6.96 | 200 | 3.1 | |
WGⅡ140-6.3L-200 | 140 | 6.3 | 540 | 7.88 | 200 | 3.1 | |
WGⅡ140-6.7-200 | 140 | 6.7 | 569 | 8.30 | 200 | 3.1 | |
WGⅡ140-8.0L-200 | 140 | 8.0 | 665 | 9.68 | 200 | 3.1 | |
WGⅡ140-9.0L-200 | 140 | 9.0 | 744 | 10.7 | 200 | 3.1 | |
WGⅡ140-10.0L-200 | 140 | 10.0 | 818 | 11.9 | 200 | 3.1 | |
WGⅡ159-8.0L-200 | 159 | 8.0 | 548 | 9.11 | 200 | 3.5 | |
WGⅡ159-10.0L-200 | 159 | 10.0 | 660 | 10.9 | 200 | 3.5 | |
WGⅡ159-12.0L-200 | 159 | 12.0 | 780 | 13.1 | 200 | 3.5 | |
WGⅡ159-13.4L-200 | 159 | 13.4 | 861 | 15.4 | 200 | 3.5 | |
WGⅡ159-15.0L-200 | 159 | 15.0 | 932 | 16.8 | 200 | 3.5 | |
WGⅡ165-10.0L-200 | 165 | 10.0 | 615 | 12.5 | 200 | 3.6 | |
WGⅡ165-12.0L-200 | 165 | 12.0 | 725 | 14.4 | 200 | 3.6 | |
WGⅡ165-15.0L-200 | 165 | 15.0 | 880 | 17.2 | 200 | 3.6 | |
WGⅡ180-20.0L-200 | 180 | 20.0 | 1012 | 24.8 | 200 | 3.9 | |
ISO219-40.0L-200 | 219 | 40.0 | 1300 | 48.0 | 200 | 5.7 | |
ISO232-40.0L-200 | 232 | 40.0 | 1167 | 43.0 | 200 | 6.0 | |
ISO232-46.7L-200 | 232 | 46.7 | 1345 | 48.9 | 200 | 6.0 | |
ISO232-47.0L-200 | 232 | 47 | 1351 | 49.0 | 200 | 6.0 | |
ISO232-50.0L-200 | 232 | 50.0 | 1450 | 57.7 | 200 | 6.0 |