N2 Tank Portable Compressed Nitrogen Bottle Big Gas Cylinder
Portable compressed nitrogen cylinder large gas cylinder
Tips for safe use of cylinders:
(1) The safety condition of gas cylinders should be checked before use.
(2) Gas cylinders should be used in well-ventilated places.
(3) to prevent sun exposure in summer.
1, large nitrogen cylinder parameters: 180-267mm outer diameter; 20 litre to 80 litre nitrogen cylinders; Nitrogen cylinder working pressure is 150bar or 200BAR; Hydrostatic test pressure is 250bar or 300bar; Iso9809-3 or ISO9809-1 production standards; 37MN material or 34CrMO4;
2. alias: N2 gas bottle, Compressed Nitrogen bottle, Big Nitrogen tank, Nitrogen gas cylinder, Portable Nitrogen bottle
3、Height of large nitrogen cylinder: 1012mm-1715mm; Large nitrogen cylinder body weight: 24.8kg-81kg; Minimum design wall thickness of gas cylinders: 4.9mm to 6.2; Cylinder mouth thread: PZ27.8,PZ39; 25E; 3/4-14 NGT, etc.; Large nitrogen cylinders with a maximum gas storage capacity of 3m3-12m3 (3000L-12000L)
Shandong Hongsheng Pressure Vessel Co., Ltd. is willing to be your long-term partner and chief cylinder safety officer, and jointly escort your cylinder safety.
Portable compressed nitrogen cylinder large gas cylinder
Ring flattening test of gas cylinder:
The ring flattening test shall be carried out on one ring of width 25 mm or 4 t, whichever is the greater, taken from the cylinder body. Only the edges of the ring may be machined. The ring shall be flattened between platens until the distance between platens is in accordance with Table 4. The flattened ring shall remain visually uncracked.
1、Minimum order quantity: 100 only
2、Use cylinders:Our seamless steel cylinders are widely used in industry, medical devices, fire fighting and scientific research
3、ISO 9809 consists of the following parts, under the general title Gas cylinders
— Refillable seamless steel gas cylinders
— Design, construction and testing:
⎯ Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa
⎯ Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa
⎯ Part 3: Normalized steel cylinders
4、Impact test of cylinders:
Except for the requirements set out in this subclause, the test shall be carried out in accordance with ISO 148-1.
The impact test pieces shall be taken in the direction as required in Table 5 from the wall of the cylinder. The notch shall be perpendicular to the face of the cylinder wall (see Figure 7).
5、Portable compressed nitrogen cylinder large gas cylinder (ISO9809-3)
Type | Outside Diameter (mm) | Water Capacity (L) | Bottle Height (mm) | Weight (kg) | Working pressure (Bar) | Design wall thickness (mm) | Material Grades |
WMⅡ89-1L-150 | 89 | 1 | 240 | 1.83 | 150 | 2.4 | 37MN |
WMⅡ89-1.4L-150 | 89 | 1.4 | 310 | 2.30 | 150 | 2.4 | 37MN |
WMⅡ108-2.0L-150 | 108 | 2 | 310 | 3.62 | 150 | 2.9 | 37MN |
WMⅡ108-2.5L-150 | 108 | 2.5 | 374 | 4.29 | 150 | 2.9 | 37MN |
WMⅡ108-3.0L-150 | 108 | 3.0 | 440 | 4.96 | 150 | 2.9 | 37MN |
WMⅡ108-5.0L-150 | 108 | 5.0 | 696 | 7.74 | 150 | 2.9 | 37MN |
WMⅡ140-3.4L-150 | 140 | 3.4 | 324 | 5.3 | 150 | 3.8 | 37MN |
WMⅡ140-4.0L-150 | 140 | 4.0 | 375 | 5.89 | 150 | 3.8 | 37MN |
WMⅡ140-5.0L-150 | 140 | 5.0 | 447 | 6.96 | 150 | 3.8 | 37MN |
WMⅡ140-6.3L-150 | 140 | 6.3 | 540 | 7.88 | 150 | 3.8 | 37MN |
WMⅡ140-6.7-150 | 140 | 6.7 | 569 | 8.30 | 150 | 3.8 | 37MN |
WMⅡ140-8.0L-150 | 140 | 8.0 | 665 | 9.68 | 150 | 3.8 | 37MN |
WMⅡ140-9.0L-150 | 140 | 9.0 | 744 | 10.7 | 150 | 3.8 | 37MN |
WMⅡ140-10.0L-150 | 140 | 10.0 | 818 | 11.9 | 150 | 3.8 | 37MN |
WMⅡ159-8.0L-150 | 159 | 8.0 | 548 | 9.11 | 150 | 4.3 | 37MN |
WMⅡ159-10.0L-150 | 159 | 10.0 | 660 | 10.9 | 150 | 4.3 | 37MN |
WMⅡ159-12.0L-150 | 159 | 12.0 | 780 | 13.1 | 150 | 4.3 | 37MN |
WMⅡ159-13.4L-150 | 159 | 13.4 | 861 | 15.4 | 150 | 4.3 | 37MN |
WMⅡ159-15.0L-150 | 159 | 15.0 | 932 | 16.8 | 150 | 4.3 | 37MN |
WMⅡ180-20.0L-150 | 180 | 20.0 | 1012 | 24.8 | 150 | 4.9 | 37MN |
ISO219-40.0L-150 | 219 | 40.0 | 1300 | 48.0 | 150 | 5.7 | 37MN |
ISO232-40.0L-150 | 232 | 40.0 | 1167 | 43.0 | 150 | 6.0 | 37MN |
ISO232-46.7L-150 | 232 | 46.7 | 1345 | 48.9 | 150 | 6.0 | 37MN |
ISO232-47.0L-150 | 232 | 47 | 1351 | 49.0 | 150 | 6.0 | 37MN |
ISO232-50.0L-150 | 232 | 50.0 | 1450 | 57.7 | 150 | 6.0 | 37MN |