40L Medical Gas Medical Oxygen Cylinder Price Medical Oxygen Cylinder Suppliers For Hospital
Based on the advantages of location and resources, the company focuses on the introduction of advanced automatic industrial chain production lines in China, and strives to bring new technological breakthroughs to the development of global pressure vessel industry.
Alias: Oxygen cylinder, gas cylinders, 40L gas bottles, gas bottles, CO2 gas cylinders, 40L Argon gas cylinders;40 litre gas bottles; 40 litre gas cylinder; 40 litre gas tanks
In order to avoid cylinder explosion, gas combustion, poisoning and other accidents in use. All users of bottled gas shall, according to the nature of different gases and the relevant national standards and standards, formulate the management system for the use of bottled gas and the safe operation procedures;
40 litre argon gas bottle; 37 mn manganese steel; Gas cylinder production standard GB/T5099.3 or ISO9809-3; TUV; The outer diameter of oxygen tank is 219mm; Gas tank working pressure is 150bar; The hydrostatic test pressure of the gas tank is 250bar;
The use unit should be dedicated to the bottle. It is strictly forbidden for users to refit or change the color marks of gas cylinders or mix gas without authorization. If an accident is caused, the refit shall be held responsible;
The height of the 40-litre gas cylinder is 1300mm; 40 litre gas cylinder weight 46.4kg; The 40-litre cylinder has a maximum storage capacity of 6m3 (6000 litres); The minimum design wall thickness for 219-40 litre cylinders is 5.7mm; Cylinder mouth thread PZ27.8; 25E; 3/4-14 NGT, etc.;
Shandong Hongsheng Pressure Vessel Co., Ltd. is willing to be your long-term partner and chief cylinder safety officer, and jointly escort your cylinder safety.
-
Product Category
- - ISO9809-3 Steel Seamless Oxygen Gas Cylinders
- - ISO9809-1 Seamless Steel Oxygen Gas Cylinders
- - TUV 150BAR Industrial Gas Cylinders
- - TUV 200BAR Industrial Gas Cylinders
- - Dissolved Acetylene Cylinder
- - Aluminum Allloy Gas Cylinder
- - Gas Products
- - Flowmeter And Valve
- - Fire Cylinders
- - medical Oxygen gas cylinders
40 litre Gas Cylinder Product Parameters table (ISO9809-3 TUV 150BAR)
Type | Outside Diameter (mm) | Water Capacity (L) | Bottle Height (mm) | Weight （kg） | Working pressure （Bar） | Design wall thickness （mm） | Material Grades |
| ISO219-40.0L-150 | 219 | 40.0 | 1300 | 46.4 | 150 | 5.7 | 37MN |
| ISO232-40.0L-150 | 232 | 40.0 | 1156 | 45.7 | 150 | 6.0 | 37MN |
1、Minimum order quantity: 100 only.
2、Use cylinders:Our seamless steel cylinders are widely used in industry, medical devices, fire fighting and scientific research.
3、We are China's gas cylinder production factory, product sales:China, Southeast Asia, Middle East, Asia, Africa, Europe, Oceania, America.
4、The straightness of our cylinders shall not exceed 3‰ of the cylinder length. The perpendicularity of the cylinder should not exceed 10‰ of the length of the cylinder. The bottom transplant number of each cylinder must be complete, clear and consistent with the cylinder's marked transplant number.
5、Marking shall be in accordance with EN ISO 13769. "NOTE The marking of gas cylinders is regulated by RID, ADR and ADN which take precedence over any clause in this standard. The European Directive on the TPED includes additional marking requirements (π-marking). It is important to know that these provisions are subject to regular revisions.
After-sales service guarantee of Shandong Hongsheng Pressure Vessel Co., LTD
1、 High standard of products from a good source - from the source, the control of raw materials into the factory inspection
Our company produces all products, in every production process will strictly control the quality of products, from the source, we select raw materials must have production qualification, must issue the original product quality certificate, to ensure that the raw materials selected meet the requirements of gas cylinder production.
One, raw material warehousing inspection
1) The supplier shall provide materials: original product quality certificate;
2) According to the standard requirements of Shandong Hongsheng Raw material Inspection factory, check: appearance, outer diameter, wall thickness and chemical composition of seamless steel pipe.
1. The appearance inspection of seamless steel pipe shall ensure that the product is free from any deformation, scratch, pitting and other defects affecting the product performance;
2. The outer diameter of seamless steel pipe shall be ±1% of the nominal outer diameter (hot rolled) and ±0.75% of the nominal outer diameter (cold rolled) specified in GB/T18248-2021;
3. The wall thickness of seamless steel pipe is hot rolled (-10%~+12.5%) and cold rolled ±10% according to the nominal wall thickness stipulated by GB/T18248;
4. The analysis of metal chemical composition in seamless steel pipe shall be conducted according to the detailed provisions of GB/T18248-2021 and TSG23-2021 on chemical composition.
The list of ingredients is as follows: List of chemical composition (mass fraction) /%
| Mark | C | Si | Mn | P | S | S+P | Cr | Mo | V | Ni | Cu |
| 37MN | 0.34 ~ 0.40 | 0.10 ~ 0.30 | 1.35 ~ 1.75 | ≤ 0.015 | ≤ 0.010 | ≤ 0.020 | ≤ 0.30 | - | - | ≤0.30 | ≤0.20 |
| 34CrMo4 | 0.30~0.37 | ≤0.40 | 0.60 ~ 0.90 | ≤ 0.015 | ≤ 0.010 | ≤ 0.020 | 1.9 ~ 1.2 | 0.15 ~ 0.3 | - | ≤0.30 | ≤0.20 |
5、Cylinder quality traceability from the source, each cylinder at the bottom of the imprint transplant number, to ensure the traceability of cylinder products.
Two, seamless cylinder test center
We have a sound seamless cylinder testing center, each batch of products, after strict testing, can enter the next process of production, to ensure that the products really meet the requirements of production standards, to ensure the delivery of qualified products to customers.
Through the above inspection, we can choose high-quality materials for customers, and strictly control the production process, to ensure that we can deliver qualified products of excellent quality for customers, to avoid the late products due to quality problems such as safety risks.
2、 Product quality control
In order to ensure the smooth implementation of the customer's distribution plan, according to the requirements of production, supply and sales, the sales department, quality inspection Department and production and supply Department cooperate with each other to clarify their responsibilities and ensure the successful completion of the project according to the requirements of the product negotiation.
Our production and quality inspection personnel have decades of experience in the gas cylinder industry, and are fully capable of ensuring the smooth implementation of products. Production workers are through strict technical training, can ensure the normal production of qualified products.
1) Products are produced in full accordance with order standards such as ISO9809-3, ISO9809-1, GB/T5099.3.
2) All products have gone through strict inspection procedures, according to the batch of blasting test, as well as water pressure and air tightness test, to ensure that the products meet the quality requirements before leaving the factory.
3) For each production order, we will hold a production technical meeting before production, and display the order information on the workshop screen at any time to ensure zero error.
3、 Communication zero distance - 24 hours technical consulting service support
After our company to ensure that products are sold, when the guest products use problems, help guests to solve the problem as soon as possible, using 7 x24 hours of telephone, online and other way of technical advisory services, each of our sales staff, is thought a sales engineer, for the product performance, technical essentials are very proficient.
In the process of using the product, users can provide timely and effective technical services, timely determine the solution, as soon as possible to restore the product function.
4、 Because of trust, can be worth having
Every employee of Shandong Hongsheng, strict control of the process of each link of the product, to ensure that we have good confidence to provide you with perfect service.
We will also provide the relevant cylinder operation precautions and safety precautions from time to time, to ensure that users can really rest assured when using.
Shandong Hongsheng Pressure Vessel Co., Ltd. is willing to be your long-term partner and chief cylinder safety officer, and jointly escort your cylinder safety.