12L 150bar CO2 Bottle Argon Nitrogen Helium N2O Air Cylinder
12L 150bar CO2 bottle Argon Nitrogen Helium N2O Air cylinder
Before use, the safety condition of gas cylinders should be checked to confirm the gas contained in them.
The storage and use of gas cylinders that do not meet the safety technical requirements are strictly prohibited, and the use of gas cylinders must be strictly in accordance with the requirements of the operation manual.
12 litre oxygen cylinder cylinder; TUV; 37 mn manganese steel; Gas cylinder production standard GB/T5099.3 or ISO9809-3; The outer diameter of oxygen cylinder is 140mm or 159mm; Oxygen cylinder hydrostatic test pressure is 250bar; Working pressure is 150bar;
Before use, the safety condition of gas cylinders should be checked to confirm the gas contained in them. The storage and use of gas cylinders that do not meet the safety technical requirements are strictly prohibited, and the use of gas cylinders must be strictly in accordance with the requirements of the operation manual.
Nitrogen cylinder body height 966mm or 780mm; Argon gas bottle body weight 14.3kg or 13.1 kg; Helium cylinder mouth thread PZ27.8,PZ39; 25E; 3/4-14 NGT, etc.; Maximum gas cylinder storage is 1.8m3 (1800 litres); The minimum design wall thickness of nitrogen cylinder is 3.8mm-4.3mm;
Measures should be taken to prevent the cylinder from tipping when it is put upright.
Alias:12L gas cylinders, 12L bottles, 12L Argon gas tanks, TUV Nitrogen gascylinder, 150bar Helium gas tanks;12 litre gas bottles; 12 litre gas cylinder; 12 litre gas tanks
12L 150bar CO2 Bottle Argon Nitrogen Helium N2O Air Cylinder
1、Minimum order quantity: 100 only
2、Use cylinders:Our seamless steel cylinders are widely used in industry, medical devices, fire fighting and scientific research
3、Products can be exported to countries or regions:China, Southeast Asia, Middle East, Asia, Africa, Europe, Oceania, America
4、Factory (we are the manufacturer):Shandong Hongsheng Pressure Vessel Co., LTD
5、Volumetric expansion test of gas cyliders :
The cylinder shall be rejected if it shows a permanent expansion (i.e. volumetric expansion after the pressure has been released) in excess of 10 % of the total volumetric expansion measured at the test pressure, ph.
The total and permanent expansion readings shall be recorded, together with the corresponding serial number of each cylinder tested, so that the elastic expansion (i.e. total expansion less permanent expansion) under the test pressure can be established for each cylinder.
6、Hardness test of gas cylinders:
A hardness test in accordance with ISO 6506-1 (Brinell), ISO 6508-1 (Rockwell) or other equivalent methods shall be carried out by the manufacturer after the final heat treatment of the cylinder.
The hardness values thus determined shall be within the limits specified by the cylinder manufacturer for the material, dependent upon the heat treatment used for the production of the cylinder,
NOTE Methods for measuring the surface indentation, other than given in ISO 6506-1 or ISO 6508-1 can be used subject to agreement between the parties concerned, provided that an equal level of accuracy can be demonstrated.
7、12 litre Gas Cylinder Product Parameters table (ISO9809-3 TUV 150BAR)
12L 150bar CO2 Bottle Argon Nitrogen Helium N2O Air Cylinder
Type | Outside Diameter (mm) | Water Capacity (L) | Bottle Height (mm) | Weight (kg) | Working pressure (Bar) | Design wall thickness (mm) | Material Grades |
WMⅡ140-12.0L-150 | 140 | 12.0 | 966 | 14.3 | 150 | 3.8 | 37MN |
WMⅡ159-12.0L-150 | 159 | 12.0 | 780 | 13.1 | 150 | 3.9 | 37MN |