10L 150bar CO2 Bottle Argon Nitrogen Helium N2O Air Cylinder

  • HS
  • Made in China
  • 15 to 30 days
  • Annual output of more than 800,000 pieces

10L 150bar CO2 bottle Argon Nitrogen Helium N2O Air cylinder
Then the gas cylinder is slightly softened to achieve the comprehensive performance we want a better heat treatment.

At present, most of the company's cylinders are in the state of tempering and tempering, only 219 cylinders are normalizing, which is also domestic and international

Purchase and use qualified products from enterprises with manufacturing license, do not use expired and untested cylinders;

Shandong Hongsheng pressure Vessel Co., Ltd. has a sound production qualification, can provide safe and reliable gas cylinder products.

A 10-litre oxygen tank; 37 mn manganese steel; Gas cylinder production standard GB/T5099.3 or ISO9809-3; The outer diameter of the cylinder is 140mm or 152mm or 159mm; Oxygen cylinder hydrostatic test pressure is 250bar; Working pressure is 150bar; TUV ;

Users should purchase gas from units that have gone through filling registration or distribution registration. Self-provided bottles should be entrusted by the filling registration unit for management and fixed filling.

Aliases: 10 litre gas cylinders; 1.5 m3 Oxygen tanks. 10 Litre Oxygen cylinders; 10 litre Oxygen tanks; 10 litre 150bar gas cylinders;10 litre gas bottles; 10 litre gas cylinder; 10 litre gas tanks

Argon cylinder height 818mm or 700mm or 660mm; Oxygen cylinder body weight 11.9kg or 11.2kg or 10.9kg; Oxygen cylinder mouth thread PZ19.2,PZ27.8,PZ39; 25E; 3/4-14 NGT, etc.; The maximum gas storage capacity of argon bottle is 1.5m3 (1500 liters); The minimum design wall thickness of helium cylinders is 3.8mm-4.3mm;

Get a quote? Send Inquiry Now

10L 150bar CO2 Bottle Argon Nitrogen Helium N2O Air Cylinder


10L cylinders


 Leak test of gas cylinders:

The manufacturer shall employ such manufacturing techniques and apply such tests as will demonstrate to the satisfaction of the inspector that the cylinders do not leak.

Size inspection: (1) wall thickness: the wall thickness of any point shall not be less than the minimum wall thickness specified;  (2) roundness of cylinder ≤ 2% of average outer diameter (3) straightness of cylinder ≤ 3‰ of bottle length;  (4) The perpendicularity of the bottle is less than or equal to 10‰ of the bottle length;  (5) Average diameter ≤ ±1% of nominal design diameter;  


10L bottles


Surface defects: internal and external surface defects that may negatively affect the safe use of cylinders, see ISO9809-1 

1、Minimum order quantity: 100 only

2、we are the manufacturer:Products can be exported to countries or regions:China, Southeast Asia, Middle East, Asia, Africa, Europe, Oceania, America

3、Use cylinders:Our seamless steel cylinders are widely used in industry, medical devices, fire fighting and scientific research

10L Helium gas cylinders


4、For cylinders with base ends formed by spinning, the following are three examples of typical testing procedures:

⎯ a pneumatic leakage test where the bottom end shall be clean and free from all moisture on the test pressure side. The inside area of the cylinder bottom surrounding the closure shall be subjected to a pressure equal to at least two thirds of the test pressure of the cylinder for a minimum of 1 min; this area shall be not less than 20 mm in diameter around the closure and at least 6 % of the total bottom area. The opposite side shall be covered with water or another suitable medium and closely examined for indication of leakage; cylinders that leak shall be rejected; 

⎯ a low pressure pneumatic test; 

⎯ a helium leak test.

5、Specialty gases: 40 billion market, fast growth;  High barriers correspond to high profitability

Specialty gases, as opposed to bulk gases, are usually sold in bottled form to downstream customers

Characteristics of special gases: 

1) the production process is difficult; 

2) More categories, less single product consumption; 

3) Customers are mainly concentrated in emerging growth areas with fast demand growth; 

4) The unit price of the product is high, and the customer price sensitivity is not as good as Puqi; 

5) The profitability is much higher than Puqi. 


10L cylinders


6、10L 150bar CO2 Bottle Argon Nitrogen Helium N2O Air Cylinder (ISO9809-3 TUV 150BAR)


Type

Outside

Diameter

(mm)

Water

Capacity

(L)

Bottle

 Height

(mm)

Weight

(kg)

Working 

pressure

(Bar)

Design wall 

thickness

(mm)

Material

Grades

WMⅡ140-10.0L-15014010.081811.91503.937MN
WMⅡ152-10.0L-15015210.069611.21503.737MN
WMⅡ159-10.0L-15015910.066010.91503.937MN
WMⅡ180-10.0L-15018010.057115.41504.437MN


Get the latest price? We'll respond as soon as possible(within 12 hours)
  • Required and valid email address
  • This field is required
  • This field is required
  • This field is required
  • This field is required