40L oxygen tank outlet dissolved acetylene bottle 
Product Information: 
1. GB11638 production standard; 40 litres; Outside diameter of 250mm cylinder; Filling Pressure: 1.56 MPa. Fydraulic testing Pressure: 5.2mpa; LeakageTesting Pressure: 3.0 Mpar; HP295 material; Made-in-china 

2. The minimum design wall thickness of gas cylinder is 3.3mm; Cylinder body weight: 39+1kgs; The height of cylinder is 1040mm(body of cylinder); Cylinder mouth thread: PZ39; And so on; 

3. Aliases: Dissolved Acetylene Cylinder, Export Acetylene Cylinder, 40L Acetylene Cylinder, Oxygen and Acetylene Cylinder, Acetylene tanks 

Tips for safe use of gas cylinders: 
Acetylene bottles are equipped with shock-proof rubber rings, which are designed to prevent collisions during loading, unloading, transportation and use. The rubber ring is insulation material, lying is equal to acetylene bottle on the electric insulator, resulting in the static electricity generated on the cylinder can not spread to the earth, gather on the bottle body, easy to produce electrostatic spark, when acetylene gas leakage, easy to cause combustion and explosion accidents. 
Shandong Hongsheng is willing to be your long-term partner and chief cylinder safety officer, and jointly escort your cylinder safety.

Oxygen and acetylene bottles should be placed separately, at least 5 meters apart, and 10 meters away from an open flame.

Gas cylinders should be placed vertically, not lying down, and measures should be taken to prevent dumping.

Do not use grease - stained tools, gloves or oil work clothes to contact oxygen cylinder valves, pressure relievers, etc.

It is strictly forbidden to heat the bottle with a heat source whose temperature exceeds 40 degrees Celsius.

To open or close the bottle valve, use a hand or special wrench.

After using the cylinder, close the valve, release the pressure of the pressure reducer, and wear a bottle cap.

If gas cylinder leakage is found during use, find out the cause and take corrective measures in time.

Gas cylinders should be properly kept after use. Empty bottles should be marked with "empty bottle" label; Cylinders with partially used gas should be labeled "in use"; Unused full cylinders should be labeled "Full".

40L oxygen tank outlet dissolved acetylene bottle

Oxygen combustibility, must ban oil ban fire, this is common sense.

Some oxygen plants can stand in the cutting site, waste collection station, etc., filling or welding and cutting operations, the site is full of oil, dirty and messy; Some even try bottle gas with a lighter, there are cigarettes in the mouth to open the oxygen valve, which is hard to avoid explosion accidents.

In order to reduce welding and cutting site bottle explosion casualties, oxygen cylinder, dissolved acetylene cylinder gas pipeline pull a little longer, let the bottle away from the operator some.

There is a gas cylinder color unknown, can not tell what is the bottle.

Use hydrogen bottles to fill oxygen, many are caused by the color code is not obvious, increase safety risks